Don’t Let Rust Damage Your Iron Gate

One of the most appealing things about iron gates is their attractive and sophisticated style. While an inherent quality, proper maintenance is a requirement in order to maintain this benefit. Failure to properly maintain your iron gates will lead to rust development, which is anything but appealing. Make sure you know how to keep rust at bay and keep your iron gates looking great.

Keep Up With Landscaping

Most iron gate manufacturers treat the gates with a protective coating to block out rust. However, if the coating is damaged, it's less than effective. When the coating on the gate comes in contact with abrasive objects, such as branches from a small bush, this can scratch the surface and open the door for rust to form.

Even more alarming is that once the protective coating is penetrated it can start to wear away, leaving the entire gate exposed. Make it a common practice to ensure all landscaping is trimmed a considerable distance away from the gate to avoid any contact and avoid damaging the protective coating.

Perform Routine Coating Reapplications

The most important thing to understand about protective coatings for iron is that they do wear away at some point, just from normal wear and tear. Consequently, it's important that you be proactive in reapplying the coating. How often you need to do this is highly dependent on your local climate. For example, a homeowner in a drier climate might need to reapply the treatment less often than someone who lives in a rainy climate.

However, as a general rule of thumb, it's a good idea to have an installation expert come out and inspect the condition of the fence annually. During this inspection, the technician will be able to tell you if you need a new application, as well as alert you to any other concerns.

Make Prompt Repairs

In some cases, even with all your efforts, a tiny area of the gate can succumb to rust development. In small sections, rust isn't really a problem. However, what was once a small area of rust can expand to a larger area, which is where the problems arise. The best solution is to remove areas of rust right away before they have time to expand.

To remove rust, you can use a fine-grit sandpaper to smooth out the surface. Once all the rust has been removed, clean the area to remove any residual rust that may have been left behind. Allow it to dry thoroughly and then apply a primer and paint that has been specifically designed to deter rust.

The more effort you put into preserving your iron gate, not only the better you can keep rust away, but also the longer the lifespan of the gate. Be vigilant in your efforts. For more information, contact companies like Anvil Iron Works, Inc.